Tata Steel Strip Products IJmuiden can supply cold-rolled steel with the following minimum and maximum dimensions and weights.

Description	Dimension or weight
Inside diameter	standard 610 mm, 508 mm on request
Outside diameter	minimum 1000 mm maximum 2800 mm or 10/7 x width
Coil Weight	maximum 30 ton maximum 30 - 45 ton after consultation (regarding safety and physical distribution)
KIM   width ≤ 1200 mm         1200 < width ≤ 1700 mm         width > 1700 mm	14.5 - 20.8 kg/mm width 14.5 - 20.3 kg/mm width 10.3 kg/mm width and 14.5 - 20.3 kg/mm width

Tata Steel Strip Products IJmuiden can supply cold-rolled steel with the following minimum and maximum dimensions.

Dimensions in millimetres:

Product shapes	Thickness		Width
	Min.	Max.	Min.	Max.
Mill edges	0.37	3.1	750	2000
Trimmed edges	0.37	3.1	750	2055

Please see the separate dimension paragraphs for any restrictions on particular types of cold-rolled steel.

Tata Steel Strip Products IJmuiden assumes a minimum and a maximum coil weight agreed upon with customer on the basis of our normal production practices and an order quantity corresponding to this coil weight.

Usually a minimum coil weight up to 85% of the maximum coil weight can be requested.

As a rule, pickling line welds are included.

The number of permissible recoiling line welds is determined in consultation with the customer. If welds are permitted, Tata Steel Strip Products IJmuiden is better able to implement the best coil weight.

A recoiling line weld is marked with a single hole in the center of the strip, close to the weld.

On request the identifying hole can be left out.