MagiZinc coated structural steel has a guaranteed strength. Currently structural steel with a yield strength up to 350 MPa is available. Higher strength structural steels coated with MagiZinc are being developed.

The mechanical properties and chemical composition of MagiZinc coated structural steel is in line with the following standards. 

European standard	National standards
	UK	Germany
EN 10326, 2004	BS 2989	DIN 17162-2
S220GD+ZMA	Z 22	-
S250GD+ZMA	Z 25	St E 250-2Z
S280GD+ZMA	Z 28	St E 280-2Z
S320GD+ZMA	-	St E 320-3Z
S350GD+ZMA	Z 35	St E 350-3Z

MagiZinc coated structural steel has the following mechanical properties - these are measured longitudinal to the rolling direction: 

	Rp min.2)	Rm min.	A80 min.1)
Grade	N/mm²	N/mm²	%
S220GD+ZMA	220	300	20
S250GD+ZMA	250	330	19
S280GD+ZMA	280	360	18
S320GD+ZMA	320	390	17
S350GD+ZMA	350	420	16

¹⁾ For a thickness t ≤ 0.7 mm the minimum elongation after fracture is decreased by 2%.
²⁾ If the yield point is pronounced, the values apply to the upper yield point (R_eH).

MagiZinc coated structural steel of Tata Steel Strip Products IJmuiden complies with the following heat analysis with maximum values in weight percentages: 

Grade	C	Si	Mn	P	S
	Max.	Max.	Max.	Max.	Max.
S220GD+ZMA	0.20	0.60	1.70	0.10	0.045
S250GD+ZMA	0.20	0.60	1.70	0.10	0.045
S280GD+ZMA	0.20	0.60	1.70	0.10	0.045
S320GD+ZMA	0.20	0.60	1.70	0.10	0.045
S350GD+ZMA	0.20	0.60	1.70	0.10	0.045

MagiZinc structural steel is available in the following dimensions in mm: 

	Maximum Width
Thickness	S220GD
	S250GD
from-up to	S280GD	S320GD	S350GD
0.40 - 0.45	1520	1350	-
0.45 - 0.50	1520	1370	-
0.50 - 0.60	1520	1420	-
0.60 - 0.70	1520	1520	1420
0.70 - 0.75	1520	1520	1420
0.75 - 0.90	1550	1550	1520
0.90 - 1.20	1550	1550	1550
1.20 - 1.60	1550	1550	1550
1.60 - 2.00	1520	1520	1520

Thickness range 2.00 - 2.50 mm is available on request.