Tata Steel Strip Products IJmuiden can supply galvanised and galvannealed steel with the following minimum and maximum dimensions and weights:

Dimensions

Coil dimensions

Description	Dimension or weight
Inside diameter	standard 610 mm, 508 mm on request
Outside diameter	maximum 2500 mm and at the most 10/7 x width
Coil Weight	maximum 30 ton
KIM    width ≤ 1200 mm          1200 < width ≤ 1700 mm          width > 1700 mm	15.5 - 22.0 kg/mm width 15.5 - 21.7 kg/mm width 11.0 kg/mm width and 15.5 - 21.7 kg/mm width

Strip dimensions

Description	Minimum	Maximum
Width	750 mm	2020 mm
Thickness	0.35 mm	3.0 mm

Please see the separate dimension paragraphs for any restrictions on the specific steel grades.

Tata Steel Strip Products IJmuiden assumes a minimum and a maximum coil weight agreed upon with customer on the basis of our normal production practices and an order quantity corresponding to this coil weight.

Usually a minimum coil weight up to 85% of the maximum coil weight can be requested. 

As a rule, pickling line welds are included.

The number of permissible recoiling line welds is determined in consultation with the customer. If welds are permitted, Tata Steel Strip Products IJmuiden is better able to implement the best coil weight. 

A recoiling line weld is marked with a single hole in the center of the strip, close to the weld.

On request the identifying hole can be left out.